Energol THB is recommended for marine steam turbines and reduction gears. It is also suitable for use in turbo-chargers. Additionally Energol THB may be used for general lubrication.
Main Performance Features
High oxidation stability for extended service life.
Good demulsification properties.
Good anti-foam and air release properties.
Energol THB is fully approved by major marine steam turbine manufacturers world-wide.
Care and Handling
It is recommended that when Energol THB is used as a steam turbine oil it is continuously centrifuged and filtered in accordance with manufacturers' instructions.
Packaging and Storage
Supplied in bulk and drums of approximately 210 liters. Where outdoor storage is unavoidable, drums should be covered. The drums should be stored in such a way as to ensure they are not damaged and grade markings not obliterated; position them horizontally so as to prevent water collecting on drum ends. Ensure drums are tightly re-sealed after use.
Kinematics Viscosity 400C
Flash Point (PMC)
The above figures are typical of those obtained with normal production tolerances, and do not constitute a specification. Note 1 mm2 s-1 = 1 cSt.
Health, Safety and Environment
Health, safety and environmental information is provided for this product in the Material Safety Data Sheet. This gives details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products. The British Petroleum Company plc or its subsidiaries will not accept liability if the product is used other than in the manner or with the precautions or for the purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local BP office.