Компания ГлавМорСнаб - General Maritime Supply - судовое снабжение


English version »
Судовое снабжение - Качественный СЕРВИС
Каталог снабжения
   
Услуги
Услуги
   
Производство
Производство
   
Фотогалерея
Фотогалерея





Снабжение | Масла ВР | Energol DL-MP Multi-Purpose Diesel Engine Lubricant

Масла ВР

Energol DL-MP Energol DL-MP is alkaline multi-purpose marine diesel engine oil.
Application Energol DL-MP is recommended for the crankcase lubrication requirements of medium speed trunk piston engines operating with ISO 8217 type DMA/DMB/DMC distillate fuels. Energol DL-MP 30 may also be applied as a crosshead engine system oil and has the necessary performance for the latest ‘camless’ designs. Energol OE-HT 30 however remains the first choice system oil for crosshead engines.
Main Performance Features
  • Detergency/dispersancy characteristics ensuring a high level of engine crankcase cleanliness.
  • Meets API CD performance level.
  • High thermal and oxidation stability for superior piston cooling performance.
  • Alkalinity to neutralize the acidic products of combustion.
  • Excellent water rejection performance in centrifuges.
  • Improved load-carrying performance to FZG load stage 12.
Approvals Energol DL-MP 30 is fully approved by major engine manufacturers world-wide
Care and Handling It is recommended that Energol DL-MP is continuously centrifuged and/or filtered in accordance with manufacturers' instructions. Manufacturers' oil change intervals should be observed.
Packaging and Storage Supplied in bulk and drums of approximately 210 liters. Where outdoor storage is unavoidable, drums should be covered. The drums should be stored in such a way as to ensure they are not damaged and grade markings are not obliterated. They should be positioned horizontally so as to prevent water collecting on drum ends. Ensure drums are tightly re-sealed after use.
Typical Characteristics
Test Method Units DL-MP 30 DL-MP 40
SAE Number 30 40
Kinematics Viscosity @1000C ASTM D445 mm2 s-111.5 14.0
Total Base Number (TBN) ASTM D2896 mgKOH/g 9 5
Density @150C ASTM D1298 kg/m3 890 890
Flash Point (PMC) ASTM D93 0C >200 >200
Pour point ASTM D97 0C -15 -9

The above figures are typical of those obtained with normal production tolerances, and do not constitute a specification. Note 1 mm2 s-1 = 1 cSt.
Health, Safety and Environment Health, safety and environmental information is provided for this product in the Material Safety Data Sheet. This gives details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products. It should be noted that used engine oils are likely to contain potentially harmful contaminants. Avoid skin contact with all types and makes of used engine oil. BP PLC or its subsidiaries will not accept liability if the product is used other than in the manner or with the precautions or for the purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local BP office.

Copyright BP Oil International Ltd.

Логотип ГлавМорСнаб г. Новороссийск
тел.: +7 (8617) 648-150
тел.: +7 (8617) 648-160
e-mail: GMSupply@nvr.ru
Создано:
IDALGO
ARTMODEL
Все права защищены и охраняются законом.
© 2003 - 2021 г.